Typical U.S. repair prices including parts and labor, in dollars, and typical time on site in hours. Estimates only; the final price follows diagnosis.
Refrigerator Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Start relay / overload | $120–$250 | 1 hr |
| Condenser fan motor | $180–$350 | 1 hr |
| Evaporator fan motor | $200–$380 | 1.5 hr |
| Defrost heater or thermostat | $200–$400 | 1.5 hr |
| Defrost control board | $250–$450 | 1 hr |
| Water inlet valve | $150–$300 | 1 hr |
| Ice maker assembly | $200–$450 | 1 hr |
| Door gasket | $150–$350 | 1 hr |
| Main control board | $300–$600 | 1.5 hr |
| Compressor or sealed-system repair | $800–$1800 | 4 hr |
Freezer Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Start relay / overload | $120–$250 | 1 hr |
| Thermostat | $150–$300 | 1 hr |
| Condenser fan motor | $180–$350 | 1 hr |
| Defrost heater | $200–$400 | 1.5 hr |
| Door or lid gasket | $150–$300 | 1 hr |
Washing Machine Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Drain pump | $180–$350 | 1 hr |
| Door lock / lid switch | $150–$300 | 1 hr |
| Water inlet valve | $150–$300 | 1 hr |
| Door boot seal (front-load) | $250–$450 | 1.5 hr |
| Shock absorbers / suspension | $200–$400 | 1.5 hr |
| Drive belt | $130–$250 | 1 hr |
| Control board | $300–$600 | 1 hr |
| Tub bearings (front-load) | $450–$800 | 3 hr |
Dryer Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Thermal fuse | $120–$220 | 30 min |
| Heating element (electric) | $180–$350 | 1 hr |
| Igniter (gas) | $180–$320 | 1 hr |
| Gas valve coils | $180–$330 | 1 hr |
| Drive belt | $130–$250 | 1 hr |
| Drum rollers / idler pulley | $180–$350 | 1.5 hr |
| Motor | $300–$550 | 2 hr |
| Control board | $280–$550 | 1 hr |
Dishwasher Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Drain pump | $180–$350 | 1 hr |
| Water inlet valve | $150–$300 | 1 hr |
| Door latch | $150–$300 | 1 hr |
| Heating element | $180–$350 | 1.5 hr |
| Circulation pump / motor | $300–$550 | 2 hr |
| Control board | $300–$550 | 1 hr |
| Door gasket | $120–$250 | 30 min |
Oven Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Bake or broil element | $150–$300 | 1 hr |
| Igniter (gas) | $180–$350 | 1 hr |
| Temperature sensor | $150–$280 | 1 hr |
| Door lock assembly | $200–$400 | 1.5 hr |
| Control board | $300–$600 | 1 hr |
| Door hinges / gasket | $150–$300 | 1 hr |
Range / Stove Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Surface element | $120–$250 | 30 min |
| Infinite switch | $150–$280 | 1 hr |
| Spark module / igniter | $150–$300 | 1 hr |
| Oven igniter | $180–$350 | 1 hr |
| Control board | $300–$600 | 1 hr |
Cooktop Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Radiant element | $180–$350 | 1 hr |
| Infinite switch | $150–$280 | 1 hr |
| Spark igniter / module | $150–$300 | 1 hr |
| Induction power board | $350–$700 | 1.5 hr |
| Glass top replacement | $400–$900 | 2 hr |
Microwave Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Door switch and fuse | $100–$200 | 30 min |
| Turntable motor | $100–$200 | 30 min |
| High-voltage diode / capacitor | $150–$280 | 1 hr |
| Magnetron | $200–$380 | 1 hr |
| Touchpad / control board | $200–$400 | 1 hr |
Ice Maker Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Water inlet valve | $150–$300 | 1 hr |
| Ice maker module | $180–$400 | 1 hr |
| Fill tube heater / thaw | $120–$250 | 1 hr |
| Water filter + flush | $80–$150 | 30 min |
Garbage Disposal Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Unjam and reset | $90–$180 | 30 min |
| Mounting gasket / leak | $120–$250 | 1 hr |
| Replace disposal unit | $250–$550 | 1.5 hr |
Water Heater Repair Costs
| Repair | Typical cost | Time on site |
|---|
| Heating element (electric) | $200–$400 | 1.5 hr |
| Thermostat (electric) | $180–$350 | 1 hr |
| Thermocouple / flame sensor (gas) | $150–$300 | 1 hr |
| Gas control valve | $350–$650 | 2 hr |
| Pressure relief valve | $150–$300 | 1 hr |
| Anode rod | $200–$400 | 1.5 hr |
Need a Technician Nationwide?